这几天在折腾学习PYNQ-Z2,然后看到官方文档中介绍了如何安装板卡文件。[1]
Vivado board files contain the configuration for a board that is required when creating a new project in Vivado.
Installing these files in Vivado, allows the board to be selected when creating a new project. This will configure the Zynq PS settings.
To install the board files, extract, and copy the board files folder to:
<Xilinx installation directory>\Vivado\<version>\data\boards
If Vivado is open, it must be restart to load in the new project files before a new project can be created.
然而,我将解压的文件夹直接放入boards
之后,在Vivado
并不能选取pynq-z2
,然后经过一番搜索找到一篇教程——Vivado Version 2015.1 and Later Board File Installation (Legacy)
[2]。这个教程介绍的较为完整,意思是新的板卡文件需要放入下一层目录,即board_files
中去。
事实上,pynq-z2
板卡文件应该放置于boards\board_files
中,即最后解压出来的文件夹pynq-z2
放置在里面,这样在Vivado
中创建项目时,选择板卡,就能够找到pynq-z2
了。
参考链接
- https://pynq.readthedocs.io/en/v2.3/overlay_design_methodology/board_settings.html
- https://reference.digilentinc.com/reference/software/vivado/board-files
本文由 admin 创作,采用 知识共享署名4.0 国际许可协议进行许可
本站文章除注明转载/出处外,均为本站原创或翻译,转载前请务必署名
最后编辑时间为: Jan 23, 2021 at 11:48 am
vivado2020照做了也还是找不到板卡,哎
az,最近太忙才看到消息,
![屏幕截图 2021-07-22 224026.png](https://i.loli.net/2021/07/22/v24kr8Jq5wnz6pZ.png)
![屏幕截图 2021-07-22 224043.png](https://i.loli.net/2021/07/22/wLanA5DUOYxKB1p.png)
看看你是這樣放的嗎?